Sintered Oil Graphite Impregnated Iron Bushing
DALON Sintered Oil Graphite Impregnated Iron Bushing are manufactured of pressed iron powders by sintered technology and impregnated with lubricating oil and high porosity. Increased iron content makes these bushing stronger and more resistant to shock loads than standard oil-embedded bushing; they can operate at lower speeds.
- Penghantaran Cepat
- Jaminan kualiti
- Perkhidmatan Pelanggan 24/7
pengenalan produk
PRODUK PENGENALAN
Sintered Oil Graphite Impregnated Iron Bushing TO TUGAS BERAT INDUSTRI APLIKASI
Sintered Oil Graphite Impregnated Iron Bushing have superb values in all engineering applications.
The properties of Sintered Oil Graphite Impregnated Iron Bushing are significantly defined by the high level of precision in manufacture and the porosity of the sintered material. AAAA are deployed in almost all fields of industrial area, which from simple plain bearings used in wide range of engineering to high-load bushings in heavy-duty industry.
|
System of Measurement |
Inch / Metrik |
|
Galas Jenis |
Biasa |
|
Plain Bearing Jenis |
Lengan / Flange / Sfera |
|
Untuk Beban Arah |
Jejari |
|
Bahan |
Besi berasaskan |
|
Toleransi Standard |
F7 r7 Js13 |
|
Pelinciran Kaedah |
Embedded Dilincirkan |
|
For Shaft Type |
Pusingan |
|
Shaft Mount Type |
Slip Muat |
Beban Arah:
Sintered Iron Bushing is Suitable for use in a wide range of environments
Marin persekitaran
Radio-active environments
Hubungi dengan menghakis liquids or substances incompatible with oils

TYPES OF SINTERED IRON BUSH BEARING

SILINDER

FLANGE

SPHERICAL

SPHERICAL WITH RING
DALON BUSHING TOLERANSI
Standard material spesifikasi include: SAE 841 (CuSn9010), ASTMB 438 Gred 1 Type II,
CuSn 6-6-3, Sint B 50 & Standard impregnating oil conforms to SAE 30 specifications
Sintered Gangsa dan besi based self-lubricating bushings are made of two different functions:
The metallic alloy structure which supports and transfers the mechanical loads
The oil lubricant or graphite contents which separates two surfaces in relative motion and to reduce friction.

DALON BUSHING FAQ:
Q: Bushing type selection?
A: The metallic structure of the self-lubricating bushing can be made from a wide range of bronze or iron based alloys. To select the proper material for a given application, it is necessary to check the maximum values of the material characteristics in comparison with:
Shaft linear speed - v
Digunakan load - p
PV (load x speed) faktor
Shaft kekerasan and surface roughness and other parameters such as working
temperature and type of lubrication, etc.
Q: De-impregnation & Re-Impregnation?
A: De-impregnation required Degrease and wash in appropriate solvent
Hapuskan the lubricant in a furnace heated around 400 degree for 40 minutes under a neutral atmosphere such as N2, or with reducing agent such as N2 plus H2
Re-Impregnation need Immerge during one hour the parts in an oil bath heated at a temperature between 60 degree and 120 degree , depending on oil kelikatan . Kemudian cool down in an oil bath back to room temperature. Finally drain and dry the self-lubricating bearings.


Cool tags: sintered oil graphite impregnated iron bushing, China, manufacturers, suppliers, factory, wholesale, custom














